Why Do You Need a Driveway Sensor?
We offer the Driveway Sensor System because we heard from customers that they needed a solution for a practical problem. They asked for a driveway monitoring solution capable of letting them know when someone arrives in their driveway, discretely. Unlike other systems, they asked for an expandable system. And most of all they wanted is to be simple. No digging ditches to run wires, no wall mounted boxes, no flashing lights. You'll Know Your Have Visitors When the Chime Rings! Guests
Arrive | Deliveries
are Here | Neighbors
Visit | Emergency
Help Arrives | Someone's
Leaving |
The key to a simple system is easy installation.
Okay, the word installation makes it sound too complicated. How about describing the setup process as more like peel & stick. The Wireless Driveway Sensor (included in your kit) is easy to mount with weather resistant foam tape that sticks to almost anything. We've even included mounting holes if you want a more permanent placement. Mount it Anywhere There's Traffic
There are probably a hundred places your could put the Wireless Driveway Sensor, but here are some of our recommendations:    Fencepost - Planter
- Tree
- Bush
- Fence
- Curb
- Overhead in carport
You will want a Driveway Sensor System When You Know How Well It Works.
Sets Up In Minutes!
How It Works:
When a vehicle drives past the Wireless Driveway Sensor that you've mounted where it will see the movement, it sends a signal to the transceiver and lamp control module that is plugged into a wall outlet. The garage is often an easy place to plug it in. Then, you place the Chime Module inside your home, in a location where you will hear it. Don't worry, its not too loud or too soft to hear. It's just right. - The Wireless Driveway Sensor sends the command to the receiver.
- The receiver re-transmits the command through your existing house wiring to the chime. It also turns on the lamp.
- Finally, the Chime will sound, letting you know someone has arrived.
The Wireless Driveway Sensor works anytime, day or night - Weather resistant case protects the sensor from the elements.
- Easily disable the dawn/dusk feature so it will work 24 hours/day!
- Adjustable time delay! You can set the delay from 1 minute to 255 minutes!
- Locking screw prevents easy removal of batteries.
- Built in photocell works like a watchful eye and will turn lights on and off at dusk and sunrise.
- This will save you energy as it can be set to only detect motion in the dark.
- Motion Sensing detection range blankets a 20ft area
- Passive infrared technology (PIR)
- Motion Sensor is 2.5 x 2.5 inches
- Requires 2 AAA batteries (not included)
It's Expandable
The Driveway Sensors System is 100% compatible with our other home automation products. Including: - Add additional motion sensors to your system to monitor other areas around your home.
- Add additional lamp modules and remote control for even more control and convenience.
|